Description

FEATURES

This is a whisper quiet, residential water pressure system suitable for medium to large, single or multi-storey homes. Torrium2 controllers on the range provide constant flow without annoying fluctuations with flow rates of:

• HP45-05T – max. flow up to 70 lpm
• HP65-06T – max. flow up to 100 lpm
• HP85-08T – max. flow up to 140 lpm

FEATURES & BENEFITS
The HP Series Pressure Systems, consist of an HP pump fitted
with a Torrium2 controller. The Torrium2 is supplied connected
electrically to the HP pump motor for:
• Easy non-tradesmen installation and assembly
• Positive safety under varied weather conditions
The combination of the high pressures supplied by the
HP pump and constant flow control provided by the
Torrium2, enables consumers to enjoy the benefits of
a strong comfortable shower from a pump that does
not cycle, plus the reliability of adaptive technology.
The complete HP Pressure System is compact and quiet
providing for:
• Easy installation, especially where space is at a premium
• Non-intrusive operation, for consumer enjoyment
All parts of the entire system that are in contact with the water
are manufactured from safe, corrosion resistant materials for:
• Consumer confidence that their water supply will be as good
coming out as it was going into the system
• Ability to use the HP pressure system on a variety
of water qualities
Torrium2 CONTROLLER
For more information visit daveywater.com
PUMP
• Reliable twin stage impeller design
• All stainless steel construction for reliability and the ability to
pump hot water up to 50°C
• Carbon/Ceramic mechanical seal for reliable pump
operation
MOTOR
• TEFC motor constructed from corrosion resistant materials
• IP55 international protection rating for a high level of
resistance to dust and liquid entry
• Voltage variants:
– 220-240V, 50Hz, 2 pole
– 220V, 60Hz, 2 pole (/P models)
• Class F insulation
• Higher than normal 50°C ambient temperature rating for
longer life and improved tolerance to voltage variations for
peace of mind, even on the hottest days.
• Protected against both high operating
temperature and high current draw by a built-in,
automatically re-setting, thermal overload
• Permanently split P2 ‘fail safe’ capacitor design
• Motor and pump are designed for frequent starts

TORRIUM FEATURES & BENEFITS
CONSTANT FLOW AND EVEN WATER PRESSURE
To prevent annoying fluctuations in water temperature during
showers, Torrium2 uses its intelligence to provide households
with constant flow to give even water pressure. It does this
with its innovative pressure and flow sensors to start the
pump on a pressure drop and to stop it on low flow (~1 lpm).
This avoids pump cycling when there is continuing household
demand for water.
QUICK CUT-IN FOR EVEN PRESSURE
To give you strong pressure right from the start, Torrium2
is designed to cut in quickly when it senses demand for water.
It cuts in when the pressure has dropped to 80% of the
previous top (shut-off) pressure. It uses its intelligence to
automatically set this cut-in pressure each time the pump
stops. In doing so, it allows the system to automatically
accommodate for variations in pump performance or site
conditions.
ADAPTIVE STARTING
Torrium2 is clever enough to detect the difference between
normal water demand and a small leak in the system, such as
a dripping faucet or a leaking cistern. For very low flows,
Torrium2 automatically adapts to reduce the cut-in pressure,
which can be as low as 50% of its last shut-off pressure. This
significantly reduces pump cycling to improve consumer
satisfaction with the system. If normal flow is required in the
house (>0.5 lpm), Torrium2 will sense this and revert to
normal mode and initiate an immediate pump start.
CONTROLLER
To easily check the system status, Torrium2 has three simple
LED indicators.
• Red LED – the system is in standby mode
• Green LED – the pump is running
• Yellow LED – fault condition